升降貨梯軸承圈松動如何處理？

由于升降貨梯http://www.jntr168.com/系統的要求，所以對于升降貨梯易損件的日常檢查及維護非常重要。根據升降貨梯故障情況適時安排了停機維修，使升降貨梯故障對生產的影響降到最低。
Since cargo lifter system requirements, it is very important for cargo lifter consumable routine inspection and maintenance. The timing of the maintenance shutdown in accordance with cargo lifter failure to make cargo lifter failure to minimize the impact on production.

由于升降貨梯軸承緊固圈松動，致使軸承竄動，使主軸靠近升降貨梯電動機側軸承安裝部位出現嚴重磨損，最深處超過15mm，為減少停機時間，采用了鑲套修復方法。
Since cargo lifter bearing fastening ring loose, resulting in bearing rocky ledge near the spindle motor side bearing installation Huoti serious wear and tear parts, the deepest than 15mm, to reduce downtime, using the casement fix.
　　
先將升降貨梯http://www.jntr168.com/磨損部位用拋光機手工磨光，然后將軸套安裝在磨損部位，為了彌補主軸磨損后強度的損失，將軸套設計的較長。為了防止軸套在軸上竄動，在軸套和軸上鉆螺栓孔，用沉頭螺栓進行固定。
First cargo lifter wear parts with a polishing machine manual polishing, and then the sleeve is installed in wear parts, in order to compensate for the loss of the back spindle wear and tear strength, the long sleeve design. In order to prevent shifting of the shaft sleeve, the sleeve and the shaft in drill bolt holes, with countersunk head bolts fixed.