講述升降臺組焊過程

升降機在高空升降領域的作用越來越明顯，為了提高其安全性和使用性能，整個升降臺的組焊工作是非常關鍵的，要有一整套嚴格的工序步驟。下面濟南天銳升降機械的有關專家就給大家詳細介紹一下。

1、首先要進行定位，利用立柱管兩端的圓柱孔和端面來進行，并通過頂緊螺桿夾裝好立柱，確保夾裝的緊密的。
Lift manufacturers introduced the first to locate, use cylindrical bore and face to both ends of the column tube and tighten the screw through the top clamp good column, ensure a tight clamp.

2、利用輔助卡板來確定方框的位置，這樣就可以將方框與腹桿和立柱進行點焊，焊接過程中，將加工好的電動升降臺角鋼嵌人導軌進行定位，并進行點焊，最后把齒條安裝上去就可以了，在保證設備尺寸的情況下進行施焊。
Speaking auxiliary lift pallet manufacturers to determine the location of the box, so you can be the box with webs and columns were spot welding, welding process, the processed electric lift embedded rail angle positioning, and spot welding, and finally install rack up on it, to ensure device sizes situation welding.

3、建議將設備從焊裝模中脫離出，并且要進行一系列嚴格的檢測，保證焊接質量和設備的使用性能，以免影響后期的使用效果。
The manufacturer recommends to lift off from the welding equipment mold, and to conduct a series of rigorous testing to ensure the quality and performance of welding equipment, so as not to affect the results late.